Sunset_Blogger

Most car owners do not concern themselves with how the air condition system works until, it becomes faulty. Where the air conditioning isn’t functioning properly, a car owner can always rely on the quality care they get from their Ford Dealer service department.

However, it is possible for Ford owners to personally recharge their air conditioning. When recharging the air conditioning, you will need to have all the necessary equipment at hand. Only the appropriate pressurized refrigerant should be used. Car owners should consult with their Ford user manuals as to the type of refrigerant required. You are advised against mixing different types of refrigerant because it renders the recharge ineffective.*

Once the equipment is ready but before you delve into the task of recharging the air conditioning, it is important that you also take the necessary precautions. Car refrigerant has been known to be hazardous resulting in frostbite especially where the eyes and the skin have been exposed.

It is wise to wear goggles to protect the eyes and clothes that cover up the skin. A recharge kit also comes in handy. It is recommended that car owners purchase a recharge kit that comes with a pressure gauge. The gauge helps in simplifying the troubleshooting. Furthermore, the gauge allows you to keep track of exactly how much refrigerant is contained within the system making the recharging process that much easier.*

The first recharging step involves verifying if the system contains any refrigerant. This is done by fitting the charging hose on the port with low pressure. Where no refrigerant is evident, moisture within the system should be eliminated. Refrigerant is depleted by leaks. Spraying fittings with soapy water may help car owners check for and repair leaks. The car owners should then ensure that the compressor works effectively and that no form of debris is obstructing the condensing coils.*

The refrigerant can and the recharge valve and hose may then be connected together. To puncture the can’s top, the valve may be turned. To release refrigerant into the hose, the valves should be turned back out. This helps to remove any moisture. Locate the charging port with low pressure and also crank your Ford’s engine.

At this point the AC should be turned on high fan and high cool.* To allow the can dispense the refrigerant through the hose, the valve should be opened. Next the valve should then be closed and the hose disconnected. If the refrigerant was sufficient to recharge the system, the air from the car’s AC vents should be cold blowing between 38 and 45 degrees.

If you are still scratching your head, maybe you should have your Ford Dealer service department do the job. Their mechanics will ensure quality work is done on your vehicle.